A shower never stays clean for long. There is soap scum, dirt, or limescale. In short, it is essential to clean the shower well every week, whether it is the tiled floor or the shower glass.
It’s never satisfying to wash in a mildewed shower. Curiosity Insight, therefore, presents the top tips and products for cleaning a shower!
1. Clean a shower with baking soda
When it comes to cleaning recipes, baking soda is a must-have product for cleaning and shining everything. This is why it can also be used to clean the inside of the shower deeply. Whether it’s the walls of the shower or the tiles, baking soda cleans everything and efficiently.
Here’s how to clean the shower screen with baking soda:
- Use a damp cloth or sponge.
- Sprinkle a right amount of baking soda on the sponge
- Scrub the walls of the shower and the tiles
- Repeat as needed for stubborn stains
Baking soda is effective in removing lime stains and mold in a shower.
2. Clean the shower with car wax
How to use car wax to clean the shower? Here’s how to do it:
- Wash the ceramic tiles in the shower with soap and water
- Wait a few minutes for the tiles to dry
- Take car wax and spread it on the tiles in the shower
- Take a cloth and make circular movements to polish the whole
- Repeat twice during the year for a clean and shiny shower
This trick is ideal for preventing soap from sticking to the shower walls and preventing mold from forming on tile joints and elsewhere in the shower.
3. Lemon to remove soap scum in the shower
Lemon is very popular for cleaning tasks around the house and even in the shower. So here is how to use lemon to clean the shower?
- Take a lemon and cut it in half.
- Rub lemon on ceramic tiles and plumbing
- Lemon removes soap scum and lime in the shower.
- Rinse to complete cleaning
You can also take lemon juice straight and spray it on the shower walls and plumbing. Then just rub with a cloth to thoroughly clean the inside and wall of the shower.
4. Remove mold in a shower?
Of course, you can also use products specially designed for cleaning the shower and the tile joints. Simply spray this product on mold stains in the shower and scrub with a brush or sponge.
5. Use shampoo and vinegar
Why not use the shampoo you already have in the shower? To do this, you must:
- Mix a cup of vinegar with a cup of shampoo
- Then add two cups of water to the mixture
- Spray soap and lime stains with this homemade mixture
- Scrub your shower and bath well with a cloth or sponge
- Rinse and dry to finish cleaning
To get rid of very stubborn stains in the shower, you can add a little baking soda to your mixture. Very useful in removing very encrusted limestone.
6. Wash the shower with hot vinegar
To wash a shower and remove soap and shampoo residue, you can use vinegar. Here’s how to do it:
- Heat vinegar in a saucepan
- Spray the walls of the shower with the hot vinegar
- Take a sponge and rub the inside of the shower well
- Rinse thoroughly with lukewarm water to remove all traces of vinegar at the end of the cleaning
It is important not to let the vinegar act too long on the ceramic joints so as not to damage them. It is, therefore, necessary to rinse thoroughly to remove the vinegar from the tiles and the shower joints.
7. How to properly clean shower tiles?
Are the tiles greasy and very dirty in the shower? One product that is just as effective, if not more, than baking soda is soda crystals.
- Add 1/2 cup of soda crystals to 2 liters of hot water and mix.
- Use a sponge or soft brush to clean the shower tiles.
This trick, based on soda crystals, is recommended for cleaning dirty and greasy tiles, so whether it is to clean the shower or to degrease the kitchen and the hood.
8. Use bleach in the shower?
Have you noticed the presence of mold stains in the shower? Mold is truly one of the worst things you can find in your bathroom.
To remove black spots and mold stains in the shower:
- Take a cotton swab and dip it in bleach.
- Rub the cotton swab over the tile joints and where the mold is found
- Leave the bleach to act on the mold stains for a few minutes.
- Rinse thoroughly to remove all traces of bleach in the shower
But be careful, bleach is a sturdy product that is harmful to health and the environment. So why not instead use A natural product to replace bleach?
9. Use turpentine
It is possible to shine an enamel tub with turpentine. Here’s how to do it:
- Ventilate the bathroom well before starting (window, fan, etc.)
- Use a rag or sponge and some turpentine.
- Scrub the walls of the bath or shower with this solution
A tip that allows you to shine the bath as well as the shower quickly. Do not forget to ventilate the room well before, during, and after cleaning.
10. Remove water from the walls and windows of the shower
A small gesture that you should do after each shower at home is to wipe off the water on the tiles and the glass of the shower. With this small gesture, you will prevent the shower glass as well as the tiles from becoming dirty and clogged.
You can use a microfiber cloth to remove the water well or use a squeegee. The squeegee is an accessory that you should have in your bathroom and the shower.