Having beautiful, clean tile joints is always very pleasant in a house! Over time, stains, grease, and mold accumulate, and we do not know how to remove them.
If you are scrubbing the floor and still doesn’t look clean enough, it could be that your problem is the incorrect cleaning of the floor joints to eliminate the still embedded grout.
Cleaning it will require additional effort, but don’t worry that it doesn’t have to be complicated if you do it correctly. We tell you how to clean the grout on tiles so that your floor is immaculate in the house.
How to Clean Grout Stains of Bathroom and Kitchen?
1. Use anti-mold cleaners
Several new products in the form of gel or spray have been produced to eliminate the tile joints’ mold. They also prevent fungi in addition to whitening the joints.
2. Use ammonia for the tile joints
First, put on gloves to protect your hands. Then mix a little ammonia with a bit of water and spray your tile joints. Wait a few seconds and then scrub with a brush. Leave the product to act and rinse thoroughly.
3. Use laundry soap
Mix a little laundry soap with water, put the mixture on the joints, scrub with a brush, and let stand for several minutes. Then rinse.
4. Use acetone
Put on protective gloves first. Then dip a cloth in a little acetone and scrape your tile joints (with the fabric). Regularly re-wet your cloth. And don’t forget to ventilate the room well!
5. Use baking soda
Mix baking soda with a tablespoon of white vinegar. Mix until it gives a kind of paste. Put a little of the pasty mixture on the joints and rub with a brush. Then rinse.
6. Use lemon juice
Mix lemon juice with coarse salt. Then rub the joints with a brush or a cloth. Wait ten minutes and rinse thoroughly.
7. Use toothpaste
Apply white toothpaste (only on white tile joints) along your joints. Let sit for 60 minutes. If the stains are very encrusted, let stand for up to 24 hours if necessary. After the time has elapsed, rinse with water and wipe with a cloth.
8. Use steam
If you have a steam cleaner, take the small pipe or nozzle and let a jet of steam go along your joints. Steam (hot) will take off fatty areas.
9. Use white vinegar
Mix in a bowl of white vinegar with a little liquid dish soap. Scrub your tile joints with a brush and mix. Do not rinse. White vinegar is also perfect for restoring the shine to a tile.
10. Use a cleaning gum
All you have to do is rub your joints with the cleaning gum. There will be no more mold or stains.