Many people have small laundry areas and would like the convenience of extra storage. Stackable washers and dryers have been available for years. These add more space but usually have low capabilities. A homeowner can stack a typically sized dryer over a machine, offering the convenience of extra storage while keeping a great wash and dry skills. Stacking kits are available for many front-loading washers and dryers of regular size.
- Measure the distance between either the electrical connection or gas to the rear of the dryer for electrical outlets or gas in the washing zone, using a tape measure.
- Turn the dryer on its side. Use a screwdriver pliers to remove the leveling feet at the base of the dryer. Turn the dryer to a vertical position.
- Attach the plastic self-adhesive foam vibration pads to the side and front edges of the washing machine. These pads should be cut at the waist with scissors and glued in place after removal of the protective coating. Attach the metal brackets to the back two best corners of the washing machine, using a screwdriver and screw machine provided in the kit. These racks will extend upward at the end of the washing machine and then be attached to the dryer.
- Lift the dryer on the top of the washing machine with an assistant. Place the dryer in a position directly on top of the self-adhesive plastic foam. Connect the lower metal supports the two corners of the back of the dryer, using a screwdriver and the remaining machine screws provided. Connect either the electrical or gas connections. Slide the washer/dryer into place.
Tips and Warnings
- Stacking kits are available for almost every washer/dryer combination that can physically be stacked. The model number of your stacked washer/dryer should be listed as an assembly compatible with the stacking kit.
- Stack kit installation instructions may vary slightly from manufacturer to manufacturer. Always follow the manufacturer & # 039; s directions for the best installation.
- Working with electricity can be dangerous for the amateur. Always contact a professional if you have questions about changing gas or electrical connections.
Save space with a stacked washer and dryer.
Is space scarce in your laundry? The best solution is probably to stack a washer and dryer. But what should you know before shopping? Here’s what you need to know before going on a hunt for a machine and dryer set.
What does “superimpose” mean?
A stacked washer and dryer can stack one on top of the other. Usually, the machine is at the bottom and the dryer at the top.
- Note that this is slightly different from stackable appliances, those small appliances that are often found in townhouses or condos, where space is small and scarce.
- These usually are systems that open upwards rather than upwards.
- Because of the front-loading, these devices are generally longer than those with top loading. So carefully measure the space where they will stay, both in width and height (as well as the entry points into space, such as the hallway or the entrance door where the device will pass).
How are these devices different
First, they are energy efficient. The loads they accept are significant – between seven and 11 kilograms – with water consumption generally lower than that of a top loader.
- However, they are very different from compact stacked models. Small appliances can usually take about half that load, but are small enough to fit in closets.
More specifically, these washers operate differently than top loaders. In general, they have drum dawn, which agitates clothes to wash and wring.
- The top loaders turn around, lift clothes the tank, drop them into the soapy water and rub them against the tub to wash them.
Stacked devices: listen to our advice.
It is better to buy appliances built by the same manufacturer and designed as a set: the wedding suits them! Be aware that stacking devices are a bit more expensive and that it will also be necessary to think about repairs.
- It is possible to buy devices already stacked, but you can also purchase“ separate devices and stack them once at home.
- In this case, you will need specific hardware to mount the dryer on the washer in your laundry room.
- Before installing your machines, choose a location with a 220-volt electrical outlet, access to water, a water drain, and a dryer outlet.